Retrofit S Kit
Retrofit S Kit
Couldn't load pickup availability
A quality improvement game of TN.T. which simply replaces the original barrel and chamber without the need for additional modifications.
The barrel is made from a single piece of bronze and then electroplated with nickel plating. This makes its surface very hard and smooth, which is the basis for the barrel's durability and shooting accuracy.
The window for the "overhang" of the hop-up rubber is considerably larger than in conventional barrels. This makes it possible to use an elastic band with a large pressure area (up to 7 mm ), which allows the use of heavier ammunition and get a accuracy and stability of the bullet still best . The barrel is compatible with AEG and GBB type rubbers.
Rubber is also included. HLR Hop (Hyper Long Range) 60°, which was developed on the basis of the T-HOP and TR-HOP. It has a better fit and is more accurate - it increases the stability of the ball flight and is designed for long distance shooting. Even with a low initial velocity, it can have a very good range when used with the right BBs.
CNC Hop-up Chamber
The aluminum CNC camera is made of one piece and therefore has high strength and durability. There are screws on the front and sides to secure the barrel so that it does not wobble and stays firmly in the camera. The pressure adjustment is very precise with a CNC adjustment wheel. The wide pressure roller pushes perpendicularly to the rubber band, ensuring a better pressure across the entire surface of the Hop-Up rubber band.
Solar Eclipse Cannon (S)
In a conventional barrel, the ball is pushed against the bottom of the barrel by the hop-up pressure. This increases friction and reduces the hop-up effect.
At the beginning of the S canyon, in the jump pressure zone, there is a micro outgoing (0.04mm high) at the bottom of the barrel that raises/centers the ball in the barrel and reduces friction in the barrel in the initial phase of the shot. This allows the hop-up to be used more efficiently and to obtain more effect with minimal loss of energy.
Air cushion effect
Or air cushion effect. It is possible thanks to the double inner diameter of the barrel - 6.03 mm at the beginning and 6.35 mm at the end with slots - air channels. Thanks to them, the air flow behind the ball is directed and unwanted turbulence is reduced to a minimum.
Narrow precision barrels (so-called "tight bore") have the advantage that there is less space around the BB and therefore there is not as much air leakage and performance reduction as with standard barrels. Barrels with a large inner diameter (so-called "wide bore") have a positive effect on the accuracy of the BB, as the BB does not bounce off the barrel walls as much and is therefore more stable, but due to this "air leakage" they slightly reduce performance.
This range of TN.T. cannons combines the advantages of both . The barrel has a narrow diameter 6.03 mm along most of its length to achieve a good tightness and performance , and a diameter of 6.35 mm at the end, when the bullet already has maximum energy and speed, with grooves for stabilize it better.
