SW CNC Chamber and Cyma M24 Hop-Up, Gen.3

AirsoftPro 3rd Generation Hop-Up Chamber for Snow Wolf and CYMA M24 manual sniper rifles, made entirely from a single piece of 6061-T6 aluminum alloy with red anodized finish. This is a high-quality material. high resistance and at the same time lightweight. The weight of the entire camera is only 29 g. This is not a rebranding, i.e. a repackaged product from another manufacturer. The camera was manufactured in Highest quality precision CNC machines . A quality chamber is an important requirement for stable and good performance of the weapon. Only metal machined chambers provide the highest manufacturing precision without inaccuracies or burrs.

EASY AND SENSITIVE ADJUSTMENT

Chamber adjustment no longer has to be complicated by using an Allen key through the magazine well. The original plastic adjustment rods from the pistol's chamber can now be used. They are fully compatible and allow for comfortable adjustment. The pressure arm is of course made of metal and has a longer working length than the original chamber. This makes adjustment more sensitive and has a longer reach. Also included is a bolt with an O-ring which can be exchanged for a barrel safety worm screw (which passes through the original rod) to eliminate rod movement during firing.

EXTENDED USE

Compared to the basic diecast camera, the AirsoftPro camera brings a number of advantages. First and foremost is the good tightness and the workforce, that is, the high potential of increased performance . Another big advantage is the ability to use the camera so much for Original SW/CYMA barrels and rubbers , as for AEG barrels and rubbers designed primarily for electric pistols. The user can decide whether to use the original barrel chamber for the time being, or invest in a precision barrel for AEGs, of which there is a large selection on the market.

The AEG adapter, which allows the use of an AEG barrel, replaces the O-ring found on previous generations of chambers. It is specially shaped to minimise air loss and achieve the best possible seal.

QUALITY AND SMART SOLUTIONS

• The camera is mechanized by CNC in aeronautical aluminum 6061-T6 (Dural) Highly durable with a red anodized finish
• The pressure arm is also manufactured on CNC machines and is equipped with a return spring for a more reliable operation
• The arm has a longer slot and detects a longer working stroke of the plastic adjustment rod.
• There is two rubber stops between the chamber and the stock to cushion the blow, reduce the flash and improve so the shooting accuracy
• A centering ring is included for facilitate assembly/disassembly and one good barrel alignment with the striation

COMPATIBILITY AND FUTURE WITH TDC

• The camera is compatible with the original Snow Wolf and CYMA barrels and rubbers . No modification is required for use.
• Using the included AEG rubber adapter, you can use barrels with an AEG Hop Up rubber with better sealing results than the supplied O-ring
• The chamber is compatible with the original Snow Wolf and CYMA plastic Hop-Up regulating handles . No modification is required for use.
• There is a thread on the top of the chamber for possible screwing of TDC devices

EASY INSTALLATION

• Installation is very easy, manageable in 10 minutes
• The appropriate AEG barrel length for the above models is about 487mm
• Due to the higher power of sniper rifles, choose harder Hop-Up rubbers (silicone ones are not suitable). The Guarder rubber band - black - is a proven choice.
• The weight of the complete camera is 29 g

PACKAGE CONTENTS

• CNC Hop-Up Chamber for M24, Gen.3
• Rubber adapter for AEG
• Centering ring
• Pressure arm return spring
• O-ring screw (can be changed to a worm screw to fix the jump rod more firmly)
• Two rubber pressure rollers with a diameter of 3 mm for the original rubber band and 3.5 mm for the AEG rubber band under the arm (the user can shorten them according to their needs)