Kit Scorpion Piston + Guia de resorte

Key Features :

• Weight adjustable modular piston (from ~65 to 148 grams)
• Silences your Sniper
• Increases joule/fps consistency
• Adjustable air brakes with double O-ring cutouts for optimal fine-tuning
• Option to short stroke your sniper for quicker reloads (at the cost of some joules)
• Comes with 3mm Green Anti Shock/bumper Pad 40D to avoid slam sound of your piston on the cylinder head
  

The piston has 2 adjustable Air brakes included for optimal fine-tuning depending on your setup.

• 1x Short Air Brake (Optimal for 2j and 3J~ Builds or higher).
• 1x Long Air Brake (Optimal for 2J~ Builds or lower).

Golden Rules of installation

• Always put a drop of oil or silicon grease on your cup edge to achieve optimal joules.
• For 2.3j setups we recommend starting with the short air brake and unscrewing it completely.
  
• For 2.8+ setups we recommend starting with the short air brake and screw it in completely.
• Always set your hopup correctly on desired BB Weight and adjust to shoot straight.
• Higher the Joule = Shorter the Air brake
• Lower the Joule = Longer the Air brake.
• Choose your Air brake and start low, then higher (Unscrew) it each time until the setup is silent.
• When you start to lose joules then you know you are just over the perfect position of the air brake you have to screw the brake back in a bit, gain joules back, and have the most silent setup.

Good setups need adjustable air brakes because too many parts in your rifle can change the acceleration speed of the piston. BB Weight, Spring Power,  Bucking Hardness, Barrel Length, Weight of the piston etc. We also recommend buying some spring guide spacers to play with the weight of the piston and joules of the spring.

Included in this kit :

• 1x Stalker Scorpion 9MM Spring Guide (With Engraved Stalker Logo)
• 1x 3mm Green Anti Shock Pad 40D (Cylinder head Not included)
• 1x Piston cup
• 1x Aluminum piston head
• 1x Stainless steel piston Weight
• 5x Aluminum weights
• 4x Stainless steel weights
• Sear end cap made of stainless steel (15gram)
• 2 Adjustable Air Brakes (Long & Short)
• 1x Nut to lock the Air Brake setting
• 10- O rings for in between the weights or cylinder head to stop the weights from loosening by playing.
• 2x Front and Back guide rings made of POM for SSG10 specifications)